3/8'' ID High Pressure Thermoplastic LP-Gas Hose (Roll)

1.85 USD
SKU: PSHO0300
Minimum Quantity: 500
Qty in Stock: 1000
Qty:

 

  • Description
  • Product Reviews

Flex-Tech High Pressure Thermoplastic LP-Gas Hose

  • U.L. 569 Recognized Component / CSA listed.
  • For high pressure applications (LP-Gas container pressure)
  • Nominal ID = 3/8 in. (0.375 in.)
  • Nominal OD = .650 in. 
  • Weight per ft. = 0.119 lbs.
  • Standard roll = 500 ft.
  • Working pressure = 350 psig
  • For propane or natural gas
  • PSHO0200 ferrule (0.687 ID - 7329 stamp) has been reported work well with this hose (see warnings below)

     

Bulk hose pricing is by the foot and is sold in 500 ft. rolls 

 

Hose measuring/cutting is not an exact science... while we will make every effort to cut it to your exact specifications, the actual length may vary slightly.  

 

 

 WARNING:  only persons properly trained and certified in hose assembly procedures should attempt to manufacture hose assemblies.  When using hose barb fittings in conjunction with crimped hose ferrules you must select the proper sized hose barb fitting and ferrule for the diameter of hose you are using.  All completed hose assemblies must be pressure tested as required by NFPA 58.

 

 

Many hose manufacturers recommend the use of a hose ferrule that has in inside diameter (ID) between 0.010 and 0.030 larger than the hose outside diameter (OD).  Be advised that hose OD may vary from manufacturer published specifications and throughout its length due to variations in the manufacturing process

 

 

 

There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Categories